ISO 3834 Welding Quality Management
Contact us for a quoteTechnoweld gets fabricators ready for ISO 3834 certification and helps them hold it. We start with a fixed-scope gap analysis against the part your work needs, then supply the documentation or a complete welding management system, support your welding coordination, run a pre-audit before the certification body arrives, and train your people to run it.
What ISO 3834 asks of a fabricator
AS/NZS ISO 3834 sets the quality requirements for fusion welding, in the workshop and on site. Part 2 is comprehensive, Part 3 standard and Part 4 elementary. The part you need depends on the work, your client’s specification and, for structural steel, the AS/NZS 5131 construction category. The current Australian edition of Part 2 is AS/NZS ISO 3834.2:2023, an identical adoption of ISO 3834-2:2021.
ISO 9001 calls welding a special process and leaves it there. ISO 3834 sets out what controlling it takes: contract and technical review, qualified procedures and welders, competent welding coordination, controlled materials and consumables, calibrated equipment, inspection before, during and after welding, traceability and records.
Our ISO 3834 explainer covers the parts and the certification process in more detail.
What we do
- Gap analysis: a fixed-scope review of your current system and workshop practice against the part of ISO 3834 you need, with a written list of what is missing and what to do first
- Documentation: procedures, forms and registers written to fit how your workshop already works
- A complete welding management system: technical review, subcontracting, welding coordination, procurement, materials and consumables, welding control, weld mapping, inspection, calibration, traceability, nonconformance and records, ready to adopt
- Welding coordinator support: setting up welding coordination to ISO 14731 and supporting your coordinator in the role
- Pre-audit: an audit run the way the certification body will run it, so the findings come from us first
- Training: for coordinators, supervisors, inspectors and welders on running the system day to day
- WPS and welder qualification: procedures from our library of more than 3,250 qualified WPSs, and welder qualification tests witnessed under our NATA accreditation. See our welding procedure service.
Who issues the certificate
Certification is issued by an independent certification body, not by us. We prepare you for that audit, close out what it finds, and help you hold the certificate through surveillance audits.
What you get
- A gap analysis report against the part of ISO 3834 you need
- System documents in Word, yours to adopt and change
- Registers for materials, consumables, WPSs and welder qualifications
- A pre-audit report with each finding and how to close it
- Training records for the people who run the system
What our welding management system covers
The system follows a job from technical review to the manufacturer’s data report. Every procedure, form and register is mapped to the clause of ISO 3834-2 it answers. Tap a card to see when it is used.
Defines project requirements before fabrication starts, at tender and again after award.
The working form that records the outcome of the technical review.
Technical review form for pressure equipment work.
Separates a technical query from a dispensation and controls how each is raised and approved.
Controls how subcontractors are selected, approved and managed.
Audit form for assessing a subcontractor before approval.
Records surveillance of a subcontractor's work while the job runs.
Defines the welding coordination roles, their responsibilities and the qualifications or competence each needs.
Reference matrix of coordination tasks against the coordinator levels.
Method for witnessing welder and welding operator qualification tests and checking the final document.
Register of welder qualifications and their status.
Makes sure purchased materials meet the quality and traceability requirements of the product standard, and only authorised purchases are made.
Incoming inspection of steel for production.
Maintains traceability of material used in production, from stock length to finished item.
Controls purchase, storage, issue and use of welding consumables.
Checklist used when material is received.
Register of material received, its certificates and identification.
Register of welding consumables received and used.
Reference for the colour coding used to identify material.
Requires a work pack for every workshop and site project.
Template used to assemble each work pack.
Guidance on qualifying welding procedures and personnel.
Register of qualified WPSs and their status.
Identifies each weld so the WPS used, the welder and the visual and NDE results can be traced.
Inspection and test plan for structural fabrication to ISO 3834-2 comprehensive requirements.
Inspection and test plan for structural fabrication to ISO 3834-3 standard requirements.
Cutting, shaping, holing, bending and assembly of structural steel.
How welding requirements are identified, controlled and documented.
Records dimensional checks against the drawings.
Checks completed before welding starts.
Checks completed while welding is in progress.
Stamp on workshop drawings to record progressive sign-offs.
Shows the inspection status of each joint on the job.
In-process and final inspection and testing, excluding incoming inspection.
Visual inspection method and acceptance requirements for structural welds.
Records the visual inspection of completed welds.
Requests NDT and records the weld and NDT traceability.
Separates and controls nonconforming product and records system nonconformances.
Records a nonconformance, its disposition and close-out.
Surface preparation and corrosion protection, including painting and galvanising.
Inspection and test plan for coating.
Requirements for fastening to AS 4100 and AS/NZS 1554.1.
Records bolting and tensioning.
Final checks before items leave the workshop.
Sets the requirement and format of the MDR.
Contents list of the MDR.
Maintenance of welding machines.
Calibration and validation of welding machines to ISO 17662 and IEC 60974-14.
Master list of the documents in the system.
Questions fabricators ask
Which part of ISO 3834 do we need?
It depends on your client’s specification and the product standard. For structural steel, AS/NZS 5131 links the part to the construction category. We confirm it in the gap analysis.
Do you issue the ISO 3834 certificate?
No. Certification is issued by an independent certification body. We get you ready for its audit and help you keep the certificate.
We already hold ISO 9001. Do we still need ISO 3834?
If your clients or your standard ask for it, yes. ISO 9001 does not set welding requirements. ISO 3834 can sit inside your ISO 9001 system, so contract review, purchasing and records are shared rather than duplicated.
Do we need a welding coordinator?
Yes. ISO 3834 requires welding coordination personnel, and ISO 14731 sets out their tasks, responsibilities and competence. We help you set the role up and support the person in it.
How long does it take?
It depends on where you start. The gap analysis tells you, in writing, what is missing and how much work it is.
Can you supply the WPSs and welder qualifications as well?
Yes. Most procedures come from our library of more than 3,250 qualified WPSs, and welder qualification tests are witnessed under our NATA ISO/IEC 17020 accreditation.
Get your welding system audit-ready
Tell us what you fabricate, the standard or specification you work to and whether you hold ISO 9001, and we will scope the gap analysis.
Call 1300 00 WELD or request a quote.