Learn to read them yourself
The decoder gives you the answer. Our guide How to Read Weld Symbols on Australian Drawings shows you how to get there on your own: arrow side and other side, stitch welds and the 50-150 trap, full penetration butt welds, and where AS 1101.3, AWS A2.4 and ISO 2553 part company, with five symbols read end to end.
Disclaimer
The Weld Symbol Decoder is a free training and reference tool. It is not engineering advice, a design review or an inspection, and it does not replace the drawing, the specification, the applicable standard or a competent welding supervisor, inspector or engineer.
Readings are generated by artificial intelligence from the image you upload, and they can be wrong. A symbol can be misread if the image is cropped, blurred or low resolution, or if the drawing follows a different standard or edition. Check every reading against the drawing, the standard and edition named in your contract, and the approved WPS before anything is cut, prepared or welded. If the drawing is unclear, raise an RFI with the designer.
Preparation drawings are illustrative and not to scale. They show only the dimensions stated on the symbol. Root face, root gap, angles and anything else the symbol leaves open come from the WPS or the drawing, not from the decoder.
Readings follow AS 1101.3:2026 and AWS A2.4:2020 as interpreted by Technoweld. The decoder does not reproduce either standard, and Technoweld is not affiliated with or endorsed by Standards Australia, the American Welding Society or ISO.
To read your symbol, the image and any note you add are sent to our AI provider, Anthropic, for processing. Technoweld does not keep a copy on this website. Your IP address is not stored; a one-way hash of it is held briefly to limit the number of requests. Crop the image to the symbol, and do not upload drawings, title blocks or client information you are not permitted to share.
To the extent permitted by law, Technoweld Pty Ltd accepts no liability for any loss, damage, cost or rework arising from use of, or reliance on, the decoder or its readings. Nothing in this disclaimer excludes, restricts or modifies any right or remedy you have under the Australian Consumer Law that cannot lawfully be excluded. Use of this website is also subject to our Terms and Conditions.